1720109 PHOENİX CCS INLET
1720109
CHARX T2HBI24-DC375-2,0C2 – Vehicle charging inlet 1720109
1720109 PHOENİX CCS Inlet, DC şarjı için tasarlanmış bir araç şarj soketidir. 375 A ve 1000 V değerlerine kadar dayanıklıdır ve yalnızca DC şarjı destekler. Cihazda 24V kilitleme aktüatörü ve 2 metre uzunluğunda kablo mevcuttur.
CHARX connect universal, Vehicle charging inlet, for charging with direct current (DC), CCS type 2, IEC 62196-1, IEC 62196-2, 375 A / 1000 V (DC), Single wires, length: 2 m, locking actuator: 24 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC contacts.
1720109 PHOENİX CCS Inlet
Phoenix Contact’un “1720109 PHOENIX CCS Inlet,” CHARX serisinden olan bu DC şarj soketi, yüksek akım ve voltaj kapasiteleriyle elektrikli araçların hızlı şarj gereksinimlerini karşılamak için tasarlanmıştır. CCS Tip 2 uyumluluğuna sahip olan ürün, 1000 V DC’ye kadar 375 A sürekli akım kapasitesi sunar, bu da büyük bataryalara sahip elektrikli araçlar için hızlı ve verimli şarj sağlar. Boost modu etkinleştirildiğinde 500 A’nin üzerinde akımlar desteklenebilir, böylece çok daha kısa sürede daha yüksek güç aktarımı sağlanır.
Ek olarak, bu inlet, güvenli bağlantı sağlamak için 24V kilitleme aktüatörü ve modüle edilmiş güç hattı iletişimi (PLC) ile donatılmıştır. IP54 koruma sınıfı ile dayanıklı yapı sunan ürün, ayrıca IEC 62196 standartları ile uyumludur, bu da birçok ülkede uyumlu istasyonlarla geniş bir uyumluluk sunar. Phoenix Contact’ın CHARX serisi, elektrikli araçların farklı şarj ihtiyaçlarına yanıt verirken uzun ömürlü ve yüksek performanslı çözümler sağlama amacı taşır
Product type | Vehicle charging inlet 1720109 |
Product family | CHARX connect universal |
Application | for charging with direct current (DC) |
for installation in electric vehicles (EV) | |
Charging standard | CCS type 2 |
Charging mode | Mode 4 |
Type of signal transmission | Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 1720109 |
Note on the connection method | Crimp connection, cannot be disconnected |
Insulation resistance | > 200 MΩ |
Coding | 4.7 kΩ (between PE and PP) |
Temperature measurement | DC contacts: 2x PT1000 (DIN EN 60751) |
Type of charging current | DC |
Charging power | 325 kW |
Charging current | 325 A |
Type of charging current | DC Boost Mode |
Charging power | > 500 kW (Boost Mode, depending on the ambient conditions. For detailed information, see the packing slip in the download area for this item.) |
Charging current | > 500 A (Boost Mode, depending on the ambient conditions. For detailed information, see the packing slip in the download area for this item.) |
Power contact | |
Number | 3 (PE, DC+, DC-) |
Rated voltage | 1000 V DC |
Rated current | 375 A DC |
Signal contact | |
Number | 2 (CP, PP) |
Rated voltage | 30 V AC |
Rated current | 2 A |
Temperature sensors (Pt 1000) | |
Sensor type | Pt 1000 |
Standards/regulations | DIN EN 60751 |
Attachment point | 2 sensors for the DC contacts |
Recommended measured current | ≤ 1 mA (Umax= 16 V DC) |
Coefficient | 3850 ppm/K |
Ambient temperature | -40 °C … 130 °C |
Locking actuator | |
Operating voltage | 24 V |
Note number of positions | 4-pos. |
Position of the locking actuator | right-side |
Locking actuator | |
Operating voltage | 24 V |
Note number of positions | 4-pos. |
Position of the locking actuator | right-side |
Possible power supply range at the motor | 22 V … 26 V |
Maximum voltage for locking detection | 30 V |
Typical motor current for locking | 0.05 A |
Reverse current of the motor | max. 0.5 A |
Max. dwell time with reverse current | 1 s |
Recommended adaptation time | 600 ms |
Pause time after entry or exit path | 3 s |
Service life insertion cycles | > 10000 load cycles |
Lock recognition | available |
Mechanical emergency release | available |
Ambient temperature (operation) | -30 °C … 50 °C |
File | Description | Language | Version |
---|---|---|---|
(14.6 MB) SHA256 checksum: 085e44b4b0e4dec1c956980bd8bc05d5d03ef02c8391a82d6a893e1ce2c716d2
|
Simplified 3D model of the item
|
Değerlendirmeler
Henüz değerlendirme yapılmadı.